3M™ Tabbing and Splicing Tape 5300, Clear, 0.13 mm, 25 mm x 66 m
- 3M ID 7000072570
Yksityiskohdat
Tärkeimmät ominaisuudet
- Used in conjunction with a heat-bond tab applicating machine, 3M Tabbing and Splicing Tape 5300 provides a reliable means of liner removal in a production environment
- Since product performance will depend on actual conditions within a specific application, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular material purpose and suitable for the user’s method of application
- Recommended for use with most 3M™ Acrylic Foam Tapes
- Tape may be used for either tabbing or splicing applications
3M™ Tabbing and Splicing Tape 5300 is a 0.13 mm (0.005 in) thick, clear, pressure-sensitive adhesive backed film that provides a strong bond to many polyolefin release liners found on most 3M™ Acrylic Foam Tapes.
Recommended for Liner Removal3M™ Tabbing and Splicing Tape 5300, Clear, 0.13 mm is a pressure sensitive adhesive backed film that provides a strong bond to many polyolefin release liners found on most 3M™ Acrylic Foam Tapes. When used in conjunction with a heat-bond tab application machine, our tape provides a reliable means of liner removal in a production environment. This tape provides high tack and good strength to liners and can be used for manual applications without special equipment. Specifications 3M™ Tabbing and Splicing Tapes are available in standard widths from a minimum width of 12.7 mm (0.5 inches) up to a maximum of 150 mm (6 inches) in increments of 3.2 mm (1/8 inches). Tolerance on all widths is ± 0.8 mm (1/32 inches).
Tuotetiedot
